Wood Blinds Technical Drawing

1. SLATS Quality selected hardwood Stained and lacquered to a satin finish or painted Nominally 2" wide x 1/8" thick Slat ends stained or painted to match slat color 2. HEADRAIL .024" steel, corrosion resistant 1 1/2" x 2 1/4" U-shaped profile with rolled edges at top Polyester, baked-on finish coordinates with slats 3. BOTTOM RAIL Quality selected hardwood Stained and lacquered or painted to match slats Nominally 2" wide x 5/8" thick Ends stained or painted to match slats 4. TILTER (2" only) Cord tilt standard Fully enclosed and permanently lubricated Holds and tilts slats at any angle Control position options: Tilter at left, cordlock at right (standard) Tilter at right, cordlock at left Tilter and cordlock at right (requires 6" end rout) Tilter and cordlock at left (requires 6" end rout) Wand tilt (4A) also available Worm and gear construction Slip clutch incorporated into tilter mechanism 5. TILT WAND (when wand tilt is specified) Quality selected hardwood Stained and lacquered or painted to match slats 3/8" diameter Detachable without tools 6. TILT ROD Solid cold-rolled steel Corrosion-resistant finish 7. TILT ROD SUPPORTS Self-lubricating engineering polymer 8. END LOCKS Zinc-coated steel Each lock has adjustable tab for centering blind 9. TAPE LOCKS Color coordinated 10. LADDER OPTIONS: String tapes 100% braided, polyester yarn Horizontal rungs inter-braided with vertical cables Cloth tapes High strength poly/cotton blend webbing Tapes spaced to comply with Hunter Douglas standards for size and weight of blind 11. CORDLOCK Engineering polymer and galvanized steel housing Polymer roller bearing and steel locking dogs 12. LIFT CORD Two-ply polyester cord filler Braided polyester jacket Designed to meet or exceed Commercial Item Specification 1029.86 13. LADDER TAPE ECCENTRIC & TAPE ECCENTRIC SUPPORT (13A) Die-cast metal for optimal strength 14. INSTALLATION BRACKETS .030" steel Blinds over 48" wide have intermediate support brackets of U-shaped or swivel design (14A) with maximum spacing 48" Extension brackets (14B and 14C) available 15. DECORATIVE WOOD TASSEL Color-coordinated to blind 16. VALANCE Grafted of selected hardwoods Stained and lacquered or painted to match slats Outside valances are miter-cut and connected with a hidden return corner clip (16A); Valance attached with hidden clip on back of valance and clipped to headrail (16B) 17. BREAK-APART™ SAFETY STOP Fracture-resistant polymer color-coordinated to blind Break-apart feature to help protect children and pets from injury Single 22mm pullcord from stop to tassel (17A) DESIGN OPTIONS Two blinds or three blinds on one beadrail option available Country Woods® finest hardwood blinds- with optional de-Light™ feature (Consult your Hunter Douglas representative)